N3D Fiber laser coder

CK-N-30 FB3D / CK-N-50 FB3D

Customer Service Hotline:headquarters:(+86) 0512-6635905Taiwan branch:(+886) 2-26917119
Consulting the mailbox:

The N-3D laser marking machine breaks through the limitation of the focal length of the traditional 2D laser marking machine, and realizes the following operation modes: ① Static marking on High/Low position of  object at the same time; ② Fast static marking and cutting at the same time; ③ deep engraving/relief; ④ On-the-fly marking on high and low position of object at the same time; ⑤ 0 delay auto-focusing marking and so on.


The comparison of N-3D laser coder and general 2D laser coder:

◆ Effectively improve the performance of laser coder;

◆ Improve the recognition of content reading after coding;

◆ More convenient and easy to operate and fine control the focal length during operation;

N3Dfiberen-08.png


Level up the product advantages

Clearer making

Under the same conditions, N-3D can set a bigger spot to get thicker lines, the logo is more clearer, easier to read;


Faster marking

Under the same conditions, the N-3D can set a bigger spot, the filling times are reduced, and the marking time is shortened;


Easier operation

Fine quantitative control of the focal length position to 0.1mm makes the focusing operation easier. Without up-down the lifter, the touch screen can complete the focusing action;


Static marking on different height

In the focus range, N-3D can mark on different heights of workpieces at the same time, the focal length can be controlled freely and fast.


On-the-fly marking on different height

N-3D can mark different heights of different workpieces and different height positions of the same workpiece on the pipeline line, complete on-the-fly marking at one time, and can be developed into a focus free marking system


Deep engraving / Relief

N-3D scan head with built-in triaxial lens and mirrors. The change of focal length can be controlled directly without manual, and the deep engraving operation can be completed in one time. The operation is convenient, fast and the effect is beautiful.


Cutting

Use the Z axis control of the scan head,the thick material can be cut at one time, and the cutting progress and speed is faster, the edge is smoother, no loss, no serrations, and lower cost.



Expansion features

nmc3den-09.png



Applicable material

Metal and some non-metallic materials: nylon, ABS, PVC, PES, iron, copper, aluminum, magnesium, gold and silver, coating materials, spray materials, epoxy resin, etc. It is mainly used in product mark, micro processing, lineation, carving, precision machinery, jewelry, sanitary ware, watch, plastic button, electronic components, hardware tools, mobile communication.


Specifications

ModelCK-N-30 FB3DCK-N-50 FB3DCK-N-100 FB3D
LaserFIBER
Laser wavelength1064nm1064nm1064nm
Power30W50W100W
Dynamic z-axis speed1400mm/s
Locating precision≤0.0176mm
Minimum character0.2*0.2mm
Minimum line width0.02mm
Marking range110*110mm,Optional 140*140mm,200*200mm,300*300mm
Operation SystemNMC-3D contronl system, MC3+laser marking board
3D scan headSpecial offer: planar precision correction file & focal error correction file
Electrical interfaceSupport USB, encoder, pedal, I/O, photoelectronic sensor port
LanguageSimplified Chinese ( optional for TC, EN, JP, Kr and Portuguese )
FontTuretype, Single line font, dot matrix font etc
Electricity requirement110~220V,50~60Hz
Cooling methodFan cooling 
Ambient temperature10~40℃
SizeLaser head: 518*96.5*81.5mm,   Chassis: 365*300*168mm
WeightAppr. 25kg
AccessoriesStan lifter, encoder, photoelectronic sensor, googles, usb disk
Optional featuresAuto focus with 0 delay is possible