PMC2 is a full digital high performance laser marking board with PCI interface . Support digital galvanometer, compatible with the XY2-100 protocol, and analog galvanometer can be precisely controlled by DA-2 board as well. Retain the most IO signals to have the flexibility to connect with automation equipment sufficiently and certain laser requires additional control pins..It can control four-axis positions simultaneously,which is suitable for integrated stepper motor drive. Compatible with PCMark laser card pin position and provide various expansion cards to facilitate various wiring requirements . PMC2 function is outstanding to be the best choice of laser marking .

Technical Specification

Dimension: 160x102mm.

Processing chip ：DSP(FPGA) processor chip.

Support digital galvanometer and compliant with XY2-100 protocol.

Reposition frequency: the scan head position update in 100K.sec with 16bits positioning resolution.

The first pulse suppression for FPK,PPK and R05.

12 bits analog control signal x 2.

Support 3-axes encoder input, 3 channel for XYZ signals.

The maximum output frequency of PWM is 12.5MHz, the minimum pulse width is 0.08us.

Support 4-axies pulse/direction digital control signal output, maximum frequency is 5MHz.

General 16 digital outputs and 16 inputs.

16 digital outputs for specific laser control.

Compatible with PCMark pin allocation.

Max. 4 cards in one PC.

Support Windows XP / Vista /Windows 7/ Windows 8 / Windows 10

Application Industry

PMC2 adopts DSP (FPGA) chip for real-time processing laser marking instruction to meet the dynamic variable speed mark on the fly requirement, and simulated uniform speed mark on the fly to solve missing mark, intermittent mark,and poor quality of marking caused by PC to ensure the quality of the marking.

PMC2 provide automation control interface, can be automated conditional marking, flow marking and can control the XY table, the rotary axis; With Markingmate software, can perform rotary axis marking, XY-Table control marking, large drawing automatic segmentation of marking in laser automation control marking field.

PMC2 has a four-axis control function, can control the lens for multidimensional marking. With MarkingMate software, can be widely used in the three-dimensional marking (need the galvanometer support).