It is mainly used in glass products, crystal products, ceramics, metals, plastics, electronics and other products. It belongs to the category of cold light. At the same time, it can also be applied to products with relatively large heat response and high
Product Features
Advanced small light spot design scheme, fine lines.
Precise optical path design and processing, weak processing energy attenuation.
XY axis scanning speed is ≤7000mm/s, 0 delay, meet the requirements of high-speed marking.
The Max. marking format can reach 150×150mm, which meets the requirements of large format engraving.
The Z-axis focal length range is variable, and it can carry out deep engraving, which is suitable for 3D APPS such as relief and inner engraving.
During 3D deep marking processing, the Z-axis range is automatically adjusted to minimize the light spot and ensure the consistency of the object after marking and the graphic effect.
Fast speed, low drift, high positioning accuracy,reliable and stable operation, matching 532nm wavelength.
It is used in various industries such as optical scanning, laser marking, micro processing, glass inner carving, precision processing, etc.
Specifications
| Scan Head Specifications | ||
| Model | 532-P10 | |
| Light aperture | 10mm | |
| Input spot | 7mm | |
| Focus model | Focus after | |
| Field Lens | 100*100mm (Multiple models according to requirement) | |
| XY axis speed | ≤7000mm/s | |
| Dynamic Z-axis speed | ≤3000mm/s | |
| Repeat scale accuracy | 5urad | |
| Adapt to laser power | ≤35W | |
| General protocol | XY2-100 protocol | |
| Operating deflection Angle | ±10 | |
| Max.Gain Drift | 50 | |
| Ambient temp | 0-50℃ | |
| Weight | 3KG | |
| Size | 195*124.4*96.5mm | |
Dimensions
